Click image to view full size image
This kind of bag can keep components sensitive to static away from the potential static danger to the largest extent. Its special four-layer structure can create an inductive cover to separate the goods inside from the static field.Furthermore.the inner layer is made from polyethylene or polypropylene which can avoid static generation inside the bag.In addition,this kind of hot seal bag is translucent,so the goods inside can be easily recognized from outside.
This product can also be printed with characters,image and trademark according to customers requirements under the condition that it does not impinge the intel-lectual property of others.It helps to promote the image of enterprise.
Technical parameters:
| Item | Unit | Test standard and index |
| Metal layer resistance | ohm/sq | <100 |
| Metal layer optical transmission | Optical density | 40%-0.4optical density |
| Surface resistivity | ohm/sq | <1010 |
| Time for static removal | 5000-OV | <0.01Seftms 101B Method4046 |
| Friction static | E1A541Appendix C Avg | TriboeelectricNanoco luombs |
| Capacitance release | voltage difference-E1A541 | <10v |
| Anti-erosion | FTMS101C | No visible spots FTMS 101C Method 3005 |
| tensile strength | 1bs./in | ASTM D882>18 |
| Tear initiation | 1bs./in | ASTM D1004>2.5 |
| Puncture resistance | P.S.I | ASTM D3420>100 |
| Tear resistance | 1bs./in | ASTM D882>8 |
| MVTR | gm/100in-2/24hrs | ASTM E96<0.2 |
| Oxygen barrier | CC/100in-2/24hrs | ASTM D 3985<0.5 |
| Heat seal temperature | F | 250-375F |
| Heat seal pressure | P.S.I | 30-70 |